Dan Wesson Revolver Trigger Pull

[Just Dave]

Is it possible to lighten the double action trigger pull on a Dan Wesson mod. 715 Revolver? If so, what is involved?
It's a great gun, just wish the trigger pull wasn't so long and heavy in double action.

[Purple]

Doing a trigger job is not that big of a deal if you have some mechanical inclinations and skills. You will need a spring kit and then check YouTube for some self help videos.

[Just Dave]

Thanks for the info.

[jtg452]

Remember, you are cocking AND firing the gun with just the trigger motion (that's where the 'Double' part of double action comes in). You get the heavier resistance from compressing the main spring. An average trigger pull for a DA wheelgun is around 9 or 10 pounds. "Light" is 8 pounds. I've shot DA wheelguns with 12 pound pulls (it didn't stay 12 pounds for long once I started breaking it in) and you can shoot a trigger that heavy with fair accuracy (but only fair) if you really pay attention to doing it right. To get a 5 pound DA trigger pull, for example, you'd end up having to lighten the main spring and that could lead to light primer strikes and a failure to fire.