Results 1 to 5 of 5

Thread: 308win. load for 165 lead bullet

  1. #1
    Join Date
    Dec 2011
    Posts
    3

    Default 308win. load for 165 lead bullet

    any body got a load data for a 308 win.and a 165 lead bullet? thanks,fred





  2. Concealed Carry Giveaway
  3. #2
    Join Date
    Jun 2011
    Location
    Missouri
    Posts
    585

    Default

    I don't get down here too often, but the .308 caught my eye. Some of this depends on what you are trying to do. Find out specs. for new ammo or reload. Type of bullet, not just size, lead, JHP, target or hunting.
    May I kindly suggest buying a book such as ABCs of reloading and the LYMAN Handbook. I use these exclusively. They have tons of great info.

    Just trying to be helpful. Welcome to the forum.

    Psalm 82:3-5

  4. #3
    Join Date
    Dec 2008
    Location
    rush springs,ok
    Posts
    61

    Default

    explain better.lead bullet? factory or homemade

  5. #4
    Join Date
    Dec 2011
    Posts
    3

    Default

    308 lead round nose from lee molds.for target shooting-160grain

  6. #5
    Join Date
    Apr 2011
    Posts
    1

    Default

    For good hard cast gas checked bullets in the .308 you can use 30-30 winchester jacketed bullet data. Begin with the starting loads and shoot a 3 shot group. Go up one grain and shoot another group. Continue going up one grain at a time as you see the group size shrinking, when going up one more grain starts to open up the group stop and go back down to where the group was the best, then try a half grain either way from that. You just might be amazed at what 28.5 gr. of 3031 will do with that bullet in the 308 Win. this is the load that works the best in my grandson's By the way, heavier than standard cast bullets usually work better, try some 190gr. ones if you get the chance.
    Unfortunately most new cast bullet shooters fall into the fast shotgun or pistol powder "trap" and use 10gr. of Red Dot or 800X etc. These powders will produce inferior velocity and accuracy in comparison to normal rifle powders.
    You should be able to get around 2000fps before groups start to open up. Move to a heavier charge of a slower powder and you might even get best accuracy at 2200-2500fps if your bullets are hard enough.
    The only good use for shotgun powders in cast bullet rifle loads is for economically teaching the children to shoot, or for gallery shooting, or when plain base soft lead bullets are used.
    Buy yourself a copy of the Lee loading manual, there is an excellent chapter in there on the subject as well as good data. The Lyman is good too but leans toward shotgun powders which is a shame.
    Also you should check out 'castboolits.com" Cast Boolits - Dedicated To The World Of Cast Bullets! they are dedicated to the sport.

Facebook Comments


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •