Silencer Co on Mythbusters
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Silencer Co on Mythbusters

  1. #1

    Talking Silencer Co on Mythbusters

    So proud of my boys from UT!! Of all the cans to choose from the picked Silencer Co!!! The Sparrow .22 is next on my list! I can't find it on YouTube yet but here's the blog from Silencer Co's website.

    Silencers and Suppressors | The Silencer Co. Blog |
    There are two kinds of people: those who say to God, "Thy will be done," and those to whom God says, "All right, then, have it your way." - C. S. Lewis

  2.   
  3. #2
    Wish I had seen this yesterday...

    Hopefully it will be on again soon.

  4. Was a pretty short segment, but cool.

  5. It's on YouTube. Mythbusters posts them almost immediately after the show ends. Anyway, while a 50 to 60 dB reduction is huge, it noway gets close to "silence"er, especially in larger calibers. I am thinking about getting one for my Ruger MkIII .22, but the cost of the BATF - $200; waiting time - now in excess of 6 months; and cost of the Sparrow - $500; and the cost of the threaded barrel - $150+ means NOTHING but hassel. Also, the cost of the suppressor "stuff" means I have almost $1K more invested in a $450 gun. HELLO! I get it with the mods, but I'm no fool. If anyone thinks they can get a suppressor and happily plink / target in the City limits of Dallas...wrong. Another "small" issue is that Texas Law states that the possession of a suppressor is illegal even if BATF approves your application. I belong to Texas Law Shield and sent an email to one of the legal gurus. Still waiting for a reply.

  6. #5
    I have the Silencerco Sparrow and its awesome. I run sub-sonic through it and it's no louder than a pellet gun. I can mate it up with my S&W 15-22, Sig Mosquito, Ruger 22-45, GSG1911, two Walther P22's and a Ruger 10-22 with a Tactical Solutions threaded barrel. So, for one $700 investment, I can mod 7 of my guns. The thing that's great about the Silencerco Sparrow is that you can tear it down and clean it. .22 rounds are filthy and you can lead up the internals of a suppressor pretty quick. If you get too much lead build up, then the suppressor will not function as designed. Silencerco took that into considerations and all the internal parts are replaceable and you do not need to re-register or transfer the suppressor for the work. The outer shield of the Silencerco Sparrow is the actual registered part, so you can replace the internals without any problems.
    Kevin - NRA Life Member
    2nd Amendment = Freedom from Tyranny

  7. #6
    Join Date
    Jul 2010
    Location
    Central Florida
    Posts
    2,004
    Quote Originally Posted by CATX View Post
    It's on YouTube. Mythbusters posts them almost immediately after the show ends. Anyway, while a 50 to 60 dB reduction is huge, it noway gets close to "silence"er, especially in larger calibers. I am thinking about getting one for my Ruger MkIII .22, but the cost of the BATF - $200; waiting time - now in excess of 6 months; and cost of the Sparrow - $500; and the cost of the threaded barrel - $150+ means NOTHING but hassel. Also, the cost of the suppressor "stuff" means I have almost $1K more invested in a $450 gun. HELLO! I get it with the mods, but I'm no fool. If anyone thinks they can get a suppressor and happily plink / target in the City limits of Dallas...wrong. Another "small" issue is that Texas Law states that the possession of a suppressor is illegal even if BATF approves your application. I belong to Texas Law Shield and sent an email to one of the legal gurus. Still waiting for a reply.
    At a gun show, a couple of years back, I saw a company that made "noise reduction" barrel assemblies for a Ruger MkIII .22 pistol. I didn't pay much attention to it since I don't have a Ruger. I have no idea if they are still in business or not, but wouldn't a reducing barrel be better than a screw on can if the reduction is the same or close?
    To not stand against injustice is to stand for it.
    Don't confuse my personality and my attitude.
    My personality is who I am, my attitude depends on who you are.

  8. Quote Originally Posted by CATX View Post
    It's on YouTube. Mythbusters posts them almost immediately after the show ends. Anyway, while a 50 to 60 dB reduction is huge, it noway gets close to "silence"er, especially in larger calibers. I am thinking about getting one for my Ruger MkIII .22, but the cost of the BATF - $200; waiting time - now in excess of 6 months; and cost of the Sparrow - $500; and the cost of the threaded barrel - $150+ means NOTHING but hassel. Also, the cost of the suppressor "stuff" means I have almost $1K more invested in a $450 gun. HELLO! I get it with the mods, but I'm no fool. If anyone thinks they can get a suppressor and happily plink / target in the City limits of Dallas...wrong. Another "small" issue is that Texas Law states that the possession of a suppressor is illegal even if BATF approves your application. I belong to Texas Law Shield and sent an email to one of the legal gurus. Still waiting for a reply.
    Ok lets start with the fact that the suppressor can be used on any firearm you have in that caliber as long as it is threaded unless they are integral. Next sound reduction depends on the suppressor AND on barrel length and ammo used. I can shoot subsonic 9mm through my mp5 with a suppressor and you hear almost nothing Ie hollywood quiet., As far as 22s go the same applies I can shoot standard ammo that has a sonic crack even with a suppressor however when you use say Remington subsonic ( I buy this by the case ) you have ZERO sonic crack and with my 10/22 the only noise you hear is the bolt going click click. You simply purchase a tax stamp and yes those with criminal records do not get approved depending on the crime. Next wait times are starting to drop due to the extra contractors hired to process the paperwork. Last I am unsure where you go this illegal in Texas thing from but I know many folks in Texas with suppressors. As a matter a fact Texas now allows the use of suppressors for hunting with a permission slip. A threaded barrel may cost you 150 BUT you can have one threaded for less.

  9. #8
    I live in Texas and I have a suppressor. It was built right here in good ole' Texas, 100% legal. I bought it for my SIG 522 and just yesterday purchased a used SIG Mosquito Tachtical as it has a threaded barrel and with an adpater I can use my can on it. As stated above, when shooting with subsonic ammo all you here is the action.

  10. #9
    Join Date
    Sep 2007
    Location
    Battle Creek Mi
    Posts
    1,853
    I have an Osprey for the HK USP and it makes the .45 ACP so quiet you only hear the action opening and closeing when fired at the range....
    "The sword dose not cause the murder, and the maker of the sword dose not bear sin" Rabbi Solomon ben Isaac 11th century
    "Don't be so open minded that your brains fall out!" Father John Corapi.

  11. #10
    I love my Silencer Co Sparrow on my Ruger10/22. I'm looking for replacement barrels for my other .22 so I can use it on that one too.

    The noise from the action and the noise from the bullet impact are audible while the shot itself being fired is whisper quiet.

    I use 710 fps and 1050 fps with excellent results. Sonic bullets still crack but are much quieter than unsuppressed.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Quantcast