Your thoughts on the best holster for a CZ52 (vz.52) pistol?
Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Your thoughts on the best holster for a CZ52 (vz.52) pistol?

  1. #1
    Join Date
    May 2013
    Location
    California
    Posts
    326

    Question Your thoughts on the best holster for a CZ52 (vz.52) pistol?

    I have a vz.52 (7.62 mm pistole vz.52 / Česká Zbrojovka, Strakonice) pistol and also the parts kit for it (the one with the green box with the top that slides off). I like it a lot. However, I really would like to know from those of you in the know, what would be the best carry holster for this. If you have more than one recommendation... fire away.
    Thanks, and looking forward to your thoughts.

  2.   
  3. #2
    Join Date
    May 2013
    Location
    California
    Posts
    326
    I may have just found an answer to my own question... while poking around on some other gunboard / forum I found someone who mentioned this:

    Ross Leather - Concealment Holsters

    Apparently all the Ross Leather holsters listed on that page fit to CZ52 (vz.52) pistols.

    Also I found something on thehighroad forum that more or less said the following:

    "Uncle Mikes "Super Belt Slide" Size 20 fits a CZ-75, CZ-52, and 1911 style guns"

    So I looked it up...
    http://www.unclemikes.com/holsters/concealed-carry-holsters/super-belt-slide-holsters
    Interestingly they are not openly marketing a size 20 on the site but when you click on "shop now" you get a link that sends you to a place where you can buy a size 20:
    Super Belt Slide w/I.L.D | Shop Uncle Mikes

    That's two concealed carry holster options for the CZ-52 pistol.

    Curious if anyone has a holster preference for this pistol (these above or any other?), if so please reply to thread.

  4. #3
    Join Date
    May 2013
    Location
    California
    Posts
    326
    Did anyone have any other ideas for best concealed carry holster(s) for the vz.52 pistol? If so please post here. Thanks!

  5. #4

    Your thoughts on the best holster for a CZ52 (vz.52) pistol?

    Poke around some of the older threads and see what they have listed. I will sound like a broken record but. Three speed holsters elastic strap comfy and can wear anything. Alien holster double clip very adjustable good price built well. M82 pro comfortable adjustable. These a few really good options
    FUNNY HOW PEOPLE ALWAYS WANT THE TRUTH AS LONG AS IT'S WHAT THEY WANT TO HEAR

  6. #5
    Join Date
    May 2013
    Location
    California
    Posts
    326
    Thanks for the suggestions!

  7. #6
    Join Date
    May 2013
    Location
    California
    Posts
    326
    Quote Originally Posted by Burtboomer View Post
    Poke around some of the older threads and see what they have listed. I will sound like a broken record but. Three speed holsters elastic strap comfy and can wear anything. Alien holster double clip very adjustable good price built well. M82 pro comfortable adjustable. These a few really good options
    I sent this comment on Sept. 21 to the Alien holster people:

    "Do you have a holster that works with the vz.52 (7.62 mm pistole vz.52 / Česká Zbrojovka, Strakonice) pistol, a.k.a. the CZ-52?
    This gun will fit in a size 20 Uncle Mike's Super Belt Slide w/I.L.D.
    Someone recommended your holster so I thought I'd ask. Thanks and looking forward to your reply."

    I finally got a reply back from the Alien holster support team....

    They said,
    (from [email protected])
    "Unfortunately, at this point in time we do not offer a holster for that pistol. However, we are constantly adding new product and may offer this in the future. Please let us know if you have any other questions.
    Have a nice day!"

    Ah well... looks like the Three Speed or alternatively, the Uncle Mikes "Super Belt Slide" Size 20 are the best options for the CZ-52 pistol.

    Thanks for the tips!

  8. #7
    Join Date
    May 2013
    Location
    California
    Posts
    326
    Quote Originally Posted by Burtboomer View Post
    Poke around some of the older threads and see what they have listed. I will sound like a broken record but. Three speed holsters elastic strap comfy and can wear anything. Alien holster double clip very adjustable good price built well. M82 pro comfortable adjustable. These a few really good options
    Your response made me remember that I had recently seen an ad for Versacarry and I wondered if it might fit the CZ52 pistol. I e-mailed the company and they responded back pretty fast.

    I sent them the following question:

    " Hello, can you e-mail me and let me know what size and type of Versacarry holster if any would fit to the CZ52 pistol? This pistol is also known as the vz.52 (7.62 mm pistole vz.52 / Česká Zbrojovka, Strakonice) pistol, a.k.a. the CZ-52.
    This gun will fit in a size 20 Uncle Mike's Super Belt Slide w/I.L.D.
    Thanks and looking forward to your reply."

    This was their reply:

    "Right now, we are not producing any products for that particular gun. However, we do intend on adding many more products to our line in the future, so be sure to check back with us for updates on new releases!

    Thank you,
    Versacarry

    Versacarry Office | by SITZCO, LLC
    979.778.2000
    [email protected]"

    I think I am going to stick with the Three Speed or the Uncle Mikes "Super Belt Slide" Size 20 for the CZ52 pistol.

  9. #8
    Join Date
    May 2013
    Location
    California
    Posts
    326
    After a bit more searching.... I found one more that made sense (in addition to the Three Speed and Uncle Mikes "Super Belt Slide" size 20) for the CZ52 pistol.
    It's a Falco IWB, and even has a menu drop-down option to indicate you want it tailored to the CZ52 pistol.
    Here's the direct link to the Falco site:
    IWB Concealed Leather Gun Holster with Steel Clip - Falco Gun Holsters

    Have fun!

  10. #9
    you can make your own,fairly easily. slosh some bleach inside of an empty gallon milk jug, to kill the sting of spoiled milk. empty out the bleach and cut open the jug. Use your wife's hair dryer or borrow somebody's heat gun to flat out the plastic. Use the heat to fold the plastic around the gun, cut off the excess material, and use Chicago screws from the hardware store to fasten the welt. do NOT use the heat to 'mold" the plastic to the gun's shape, unless it's an outside the pants rig. In particular, don't melt the plastic into the trigger area, making that area wear thru the plastic when you practice your draw. Affix velcro to the outside of the rig, on a "flap' and matching velcro inside of your belt.

    You'll have to use the heat source to form a "sight track" inside of the rig, or the front sight will cut a groove in the top of your holster. :-) Carefully round and polish all corners, for comfort and affix some suede or other sort of padding on the flesh side of the rig. Dye or paint the plastic as you wish. Or contact some source of Kydex plastic, for material that's made of an acceptable color for you, all the way thru

  11. #10
    Join Date
    Jun 2011
    Location
    An Alternate Reality, I Assure You...
    Posts
    5,115
    The holster suggestions have been made, so I won't comment on that. However, are you planing on using the vz52 as a CCW piece? I ask only b/c 7.26x25 a pretty hot/zipping round for situations where you generally don't want over penetration.... I owned one, liked it a lot for its history but didn't consider it a appropriate CCW pistol. I'll have to look into some ballistics tests with JHP though, perhaps it isn't as bad as I think with that round....
    Quote Originally Posted by Deanimator View Post
    [*]Don't be afraid to use sarcasm, mockery and humiliation. They don't respect you. There's no need to pretend you respect them.
    Operation Veterans Relief: http://www.opvr.org/home.html

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Quantcast