Glock Gen 4 - Page 2
Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Glock Gen 4

  1. #11
    Thanks for the insight, thats good to know

  2.   
  3. #12
    My Glock 19 Gen 4 came with a #4 recoil spring - works flawlessly with 115 gr HP. Have heard #3 recoil springs have given FTF problems with light loads.

  4. I recently pruchased a G26 (Gen4) and have put about 500 rds of 115g thru it with not one problem

  5. #14
    Quote Originally Posted by tankdvr View Post
    I recently pruchased a G26 (Gen4) and have put about 500 rds of 115g thru it with not one problem
    That's typical for Glocks.

  6. Quote Originally Posted by marcparis View Post
    The issues were around the dual recoil springs for the Glock 19 and 17. The dual recoil spring that shipped originally were the same ones as those used in the 40cal versions and a little too stiff for lighter ammo. The springs were version 01 on the 17 and 03 on the 19. If you call Glock, they will send you free of charge a 02, or an 04 spring for you Glock 17 or 19 and that works beautifully for 115 grain ammo (or any other kind). I've had no problems with my 19 and 115 grain ammo with the new spring. I assume that with the Glock 26 since even Gen 3 was a dual recoil spring, this issue should already have been ironed out, and you should have 0 reliability problems
    +1 on this!

    I have had no issues with my Gen 4 19 at all (has RSA labeled 0-4-2).

  7. I also have the Gen 4 19 with the RSA of 0-4-2. Put 500 rounds through it with NO issues. It feels great.

  8. #17
    My Gen 4 G26, has nothing on the RSA...... but I guess this is because it G26, and apparantly this model had a dual recoil spring on the Gen 3 also

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Quantcast