How long can a direct gas inpingement system last before having to replace it?
Results 1 to 5 of 5

Thread: How long can a direct gas inpingement system last before having to replace it?

  1. #1

    How long can a direct gas inpingement system last before having to replace it?

    wondering this for a while now?

  2.   
  3. Even with a minimum of maintenance it should last forever. However, if you're talking about a full auto gun it may wear out much quicker do to the heat cycling.

  4. #3
    Join Date
    Aug 2009
    Location
    MA, Away from the liberal loonies...
    Posts
    2,658
    There is really no limit to service life. Keep it clean and lubed and it will possibly outlast you. The system is comprised of many parts. Bolt, firing pin, gas rings, gas tube etc... They will wear depending on frequency of use. It all depends on the composition of the parts... You may have to replace some of the parts..

    I've never life or limit tested one so... I don't know how many licks it takes to get to the center of that Tootsie Pop...
    You can give peace a chance alright..

    I'll seek cover in case it goes badly..

  5. #4
    Quote Originally Posted by 6shootercarry View Post
    There is really no limit to service life. Keep it clean and lubed and it will possibly outlast you. The system is comprised of many parts. Bolt, firing pin, gas rings, gas tube etc... They will wear depending on frequency of use. It all depends on the composition of the parts... You may have to replace some of the parts..

    I've never life or limit tested one so... I don't know how many licks it takes to get to the center of that Tootsie Pop...

    How do you post images in the signature area?

  6. #5
    Out of the parts that can go bad in the BCG what do yo hear that people usually have to replace or have replaced most?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Quantcast