Racking the Pistol Slide: Technique Not Strength

Racking the Pistol Slide: Technique Not Strength
Racking the Pistol Slide: Technique Not Strength
Racking the Pistol Slide: Technique Not Strength
Racking the Pistol Slide: Technique Not Strength

Several females and some males have complained over the years to me in my firearms classes that they cannot “rack the slide” on pistols, due to their weak hand strength and grip. Older males and females over the age of 60 have said they cannot use a pistol because of their age and related medical condition, like arthritis or joint tenderness. New shooters have demonstrated on the range that they are too gentle with a pistol and are afraid of slide “bite” to definitively and aggressively rack the slide as they should. Shooters cannot operate a semi-automatic pistol efficiently for loading, unloading, and clearing malfunctions without racking the slide properly and quickly. Racking the slide simply means manipulating and moving the slide back and forth on its guide rails. There are many ways and considerations for racking the slide. Competitors and plinkers alike have said and demonstrated that they cannot optimally rack the slide to perform reloads. Some have become so discouraged and thought about actually giving up practicing, shooting, or even not using guns anymore. Others have concluded that they have no choice and must use a revolver, rather than a semi-automatic pistol, for concealed carry purposes because they cannot rack the slide. But, revolvers have their own limitations and considerations. Husbands have contacted me asking me about pistol recommendations with easy to rack slides for their wives. So racking the slide is an important topic and we all must know how to perform it effectively.

WRONG: Do NOT Place Support Fingers or Hand Over Ejection Port When Racking Slide
WRONG: Do NOT Place Support Fingers or Hand Over Ejection Port When Racking Slide

Years ago when my wife began shooting, she experienced the same doubts, experiences, and challenge of racking a slide. She could pull the slide back a little, but not far enough to lock it open at first. Once she learned the proper technique, where to place her hands during racking (NOT over the ejection port), practiced this, and reinforced her positive mindset and quit worrying about slide “bite”, she was able to efficiently rack the slide on almost all pistols. In reality, there are very few healthy women and men (with positive, receptive can-do attitudes) who cannot actually be taught to rack a slide and keep it open. There are even some experienced shooters who have never been taught over there many years of shooting how to properly rack a slide, because they have relied on there muscles to adequately do it and have succeeded. They never had the need to focus on technique because of their power and strength. I want to emphasize that efficiently racking a slide is NOT about muscles and strength, it is about TECHNIQUE and your positive mindset and practice. So, I want to share with you some of the considerations and the technique for easily racking a semi-automatic pistol.

Here are the two most commonly used Steps in Racking a Pistol Slide:

  1. Grip the pistol firmly with your strong firing hand, with your trigger index finger on the frame outside of the trigger guard, while keeping the muzzle pointed down range;
  2. Grasp the slide on its back serrations with your support hand by one of these 2 methods. Try each method and decide for yourself which works best for you.
    1. SLINGSHOT Method: Keep the pistol pointed down range with the barrel ejection port upright as you would fire the gun. Also keep the gun resting slightly above your waist level and in close to your body for better leverage. Being in close to your body does limit this method somewhat because you will feel crowded performing operations in a tight space. Do not extend your arms straight out from your body, because you will not have as much leverage. Use your thumb and index finger of your support hand in a “V” position to grasp or pinch the back of the slide on the serrations and quickly pull it to the rear, like you are shooting a slingshot. Rotate the pistol slightly toward your left (as a right-handed shooter) as you pinch it and be certain to grasp a good length of the slide for better control. At the same time your grasp the slide with your support hand and rotate it, push forward STRONGLY with your strong hand like you are QUICKLY PUNCHING it forward. The role of your support hand is to primarily steady the pistol with just a little movement backward, while the strong hand handles 90% of the work of quickly pushing or punching the gun forward away from your body. This method is very fast and is used by competitive shooters, because you can keep the handgun extended toward the target and, when you rotate the handgun back, your support hand is there, ready to reacquire your two-hand grip. However, from a tactical perspective, it minimizes your ability to defend against a gun grab. Your objective and focus are on PUSHING the gun forward with your strong hand, rather than PULLING the slide backward with your support hand.
      SLINGSHOT Method
    2. OVER-THE-TOP Method: Again, keep the pistol pointed down range with the ejection port up. Rest the gun above your waist and really close to your body, while using your support hand to grasp the rear slide serrations over the top of the slide. The heel of your support hand should rest on the inside, left-side serrations (for a right-handed shooter), while you grasp the outside, right-side serrations with the 4 fingers of your support hand. Your support hand thumb is at the rear of the slide and does not grasp the slide. This method may not be as fast as the Slingshot Method, but it does give you the most powerful grip on the slide because you are using more fingers and the heel of your hand for added strength. It is best done with the pistol close to your body where the pistol is suppose to be when it is not being fired. This technique works quicker for me and seems more flexible and efficient for racking in many different situations. A lot of shooters agree with me, but you practice both and decide for yourself. One caveat I offer from my observations of several students is that those using this technique tend to significantly point the muzzle to their left (for right-handed shooters) or support side, while performing this technique. This is dangerous and can put many in harm’s way when several shooters are present. Again, your objective and focus are on PUSHING the gun forward with your strong hand, rather than PULLING the slide backward with your support hand.
      OVER-THE-TOP Method

Tips and Considerations in Racking A Pistol Slide:

1. Once you have racked the slide all the way to the rear, you must let go of the slide with a sharp snap, so that it will travel forward quickly under its own momentum. You do NOT need to gently guide the slide, baby it, and help it go forward with your support hand, especially when reloading. Learn to open your support hand with fingers off the slide when you have pulled the slide back rearward to its furthest point. Allowing your support hand to go forward with the slide is a problem called “Riding the Slide” and can cause malfunctions, jams, and stoppages. The slide needs to move forward quickly under its own recoil spring tension in order to load the gun properly.

2. A lot of pistols will auto-load or have the slide go forward and chamber a round after you firmly slam a magazine into the magazine well. For example, some of my S&W M&Ps, H&Ks, and Sigs do this. Some say a light or shorter recoil spring and/or a weak/damaged magazine spring affect the pressure exerted on the magazine follower and in turn affect the slide stop function. There is considerable debate whether this is a design feature or just haphazardly occurs. Competitive shooters and some tactical shooters prefer this auto-load feature because it makes for a very fast reload and does not require hitting the slide stop lever. Some claim the auto-load is not a generally-accepted loading technique or a design feature, even though a lot of people use it and like it. They say the slide is designed to stay back after a magazine is inserted and slamming it in can bump the slide stop out of place in the notch, cause the top round in the magazine not to strip off and be fed into the chamber, cause a malfunction, damage, or an accidental discharge to occur. The general, but controversial, conclusion is that auto-load is not a design feature, may cause unnecessary problems, and should be abandoned and reliance should be on manually racking the slide. This is a personal preference matter, with pros and cons to consider, and you should decide this carefully for yourself. You may not want to bet-your-life and rely on the auto-load process routinely occurring in self-defense situations.

3. Some argue there is good reason for allowing cycling of the slide even after you have loaded a pistol that was just fired and even if it was not shot to slide lock. A big CAUTION: Just because the slide is forward and you believe a live round is in the chamber does not make it so. Recognize that sometimes slide locks do not work after the last round has been fired, so it’s wise to decide on your preferred technique, simplify your slide-operation technique and ALWAYS follow it the same way, every time, whether for reloading, safety checking, clearing malfunctions or stoppages, cleaning, or whatever.

4. It is not enough to only learn to rack the slide back to chamber rounds or safety check it. You must also get the slide to lock back to insert a new loaded magazine, for cleaning purposes, or to insert a new magazine when the magazine follower automatically locks the slide back (for many, but not all firearms) when the spent magazine becomes empty. The slide lock is also used to lock the slide rearward to clear a Double-Feed stoppage. To lock the slide to the rear you have to push up the slide stop lever with your strong-hand thumb, as you rack the slide backwards with your support hand and before it travels forward when you punch it. A lot of shooters have to shift their strong grip hand around to the left (for a right-handed shooter) so they can lift up the slide stop lever with their strong-hand thumb. This is nothing to be ashamed of. You must shift your grip at the same time you are using your support hand to rack the slide rearward. You have to practice racking with your support hand while shifting your strong-hand grip and pushing up on the Slide Stop Lever with your thumb at the same time. Have your thumb locate and rest on the slide stop lever in preparation for shoving the slide stop up when the slide gets rearward. You want to be prepared to move the stop upward quickly without holding the slide back while you locate the stop. At first this is an ambidextrous challenge, but it can quickly be learned. Shooters should also learn to shift their strong-hand grip to operate the safety. See pictures below. It is important to note that some competitive shooters recommend that you operate the Slide Stop with your support thumb. The key is to pick one technique you prefer, Practice and then Practice some more. Do not get discouraged!

5. Recognize that the advantages of the Over-The-Top Method can be negatives for left-handers. For them, the ejection port is angled upward and their palm may cover it, likely causing problems for a Tap-Rotate-Rack-Assess-Bang drill for malfunctions and stoppages. For them the Slingshot Method has the advantage of angling the ejection port downward with no need for contortions and keeps all hands and fingers clear of the muzzle.

6. Recognize that since the slide stop lever is usually small in size, releasing it to chamber a cartridge can be difficult under stress. This process also does not allow the slide to go forward with the full force of the recoil spring behind it. In high stress situations, you might not be able to optimally use your fine-motor skills to depress the slide lock lever with total success. So, again Practice and then Practice some more.

7. Some argue against the Slingshot Method of racking the slide, especially when dealing with a stoppage. It is very difficult, if almost physically impossible, to rotate the pistol so the ejection port is pointed toward the ground, rather than upward to the sky, when resolving a stoppage. It’s nice that gravity can help with clearing the problem, but there is a big disadvantage because you have to distort your arms in an unusual and uncomfortable position to try to get ahold of the back of the slide to slingshot it at the same time. On the other hand, some shooters claim the Slingshot Method is faster and your support hand is already near and closer to where it needs to be for usual firing. You decide.

8. Some prefer the Over-The-Top Method of racking the slide because it is more versatile and can be easily used for all situations. I prefer this method and use it for reloading, safety checking, clearing malfunctions and stoppages, tactical training, and competitions. I also use the Slide Stop Release Lever sometimes for certain pistols because to me they seem to be designed to function better and more easily by me with the lever, e.g. Ruger Mark III .22 LR. You must learn to use the Slide Stop. Some claim it can be faster than the other methods, helps in case you have to function with only your strong hand, and may help get your grip back into proper position quickly. Some well-known competitive shooters advocate using the support thumb whenever possible because it is about half a second faster. So, it depends. Practice and then you decide.

Racking the Slide is a very important, mandatory function for operating a semi-automatic pistol, so select your preferred method, know the nuances of the technique, stay with it, and practice it for success.

© 2013 Col Benjamin Findley. All Rights Reserved. This article may not be reprinted or reproduced in whole or in part by mechanical means, photocopying, electronic reproduction, scanning, or any other means without prior written permission. For copyright information, contact Col Ben Findley at ColBFF@gmail.com.
No Code Needed
CCI Blazer Brass 9mm 124gr FMJ Ammunition 50rds

CCI Blazer Brass 9mm 124gr FMJ Ammunition 50rds

CCI Blazer Brass 9mm 124gr FMJ Ammunition 50rds for $15.50

$159.99 (Reg. $259.99)
No Code Needed
SCCY CPX-1 9mm Black & Stainless Pistol w/ Safety, (1 Magazine)

SCCY CPX-1 9mm Black & Stainless Pistol w/ Safety, (1 Magazine)

Looking for a cheap 9mm? You can grab a SCCY CPX-1 9mm Black & Stainless Pistol w/ Safety, (1 Magazine) for $159.99 right now at Palmetto State Armory

25% OFF!
Vertx 25% Off

Vertx 25% OFF Coupon Code

I've partnered up with Vertx to get you 25% off everything from their site. They make high-quality tactical clothing and gear. Just use the coupon code: usacarry

Previous articleHow to Avoid Lead Poisoning After Shooting
Next articleWhat if the Newspaper Exposed Your Address?
"Col Ben" is retired with 30 years service in the U.S. Air Force, with joint services Special Ops duty and training, and is Air Force qualified as "Expert" in small arms. He is a Vietnam-era Veteran. Ben is an experienced NRA-Certified Pistol Instructor, NRA Range Safety Officer, and FL Concealed Carry License Instructor. Ben recently wrote the book "Concealed Carry and Handgun Essentials for Personal Protection" (second printing) with 57 comprehensive Chapters about concealed carry and handgun principles, techniques, and tips for both experienced and new shooters. His reference book is endorsed by several organizations and is available on his website at FloridaHandgunsTraining.com. Contact him at ColBFF@gmail.com.
0 0 votes
Article Rating
Notify of
Newest Most Voted
Inline Feedbacks
View all comments
Adelbert Waldron

Excellent article. Great technique.


Great read! I got myself a new Kimber over the summer and the slide is MUCH stiffer than my old XD to the point where I have said I’m not strong enough (although I’m certainly not a little lady!). I will practice practice practice!

Colonel Ben

Hi RJ. My Kimber slide was stiff also and this technique worked great for me. Thanks for the positive comment and yes practicing it really helps. Shoot Straight!
Col Ben


You never tried to rack a KelTec P3AT using these methods. Using the sling shot method the slide comes back about 3/4 inch then hits a hard part where you cannot continue to pull back as the finger thumb grip is not strong enough to finish the job. Using the over the top method, yes you can rack it but not without covering the ejection slot. There just isnt enough room to grip it.. It doent lock back so when clearing the weapon you have to eject the magazine, then rack it and catch the round from the chamber in the same hand….or drop it on the floor….then try to look between your fingers to make sure the chamber is indeed empty, and then let go. It has to be carried with a round in the chamber because racking it would take so long you would die in the time it takes. My wife carries a Walther PP because she can rack it but cannot rack a P3AT. But the P3AT has other attributes that make it a better gun than the PP (try 8 oz in your boot) so I carry it.

Dragon Freedom

Jim when clearing a pistol the VERY FIRST STEP EVERY TIME is REMOVE THE MAGAZINE! ALWAYS! If you do not, and you fail to lock the slide back with the slide lock, you will chamber a round, failing to clear it in a safe manner.


I like Dave Spaulding’s method that uses the strongest fingers on the hand. Also, turning the gun on it’s side so gravity can help you with misfeeds seems smart.


Sorry Colonel Ben – while your suggestions above are excellent, know that there are some guns that cannot be racked by women (or some men) or those with arthritis – such as me. I now suggest to women who cannot rack slides to purchase guns such as the Walther PK 380 which is easy to rack or the Ruger SR22. The Smith and Wesson 9mm is also good but takes both strength and technique. Using the shoulders and the push pull combo works for my students. But I think you are over generalizing in saying “just use” your techniques.

Wyatt E.

if you can’t wrack it,you shouldn’t be shooting it…chances are you if you are lacking in such basic hand/finger/wrist strength,you will/could “limp-wrist” while attempting to discharge firearm,with possible result of misfeed/jam…move on to something more comfortable to operate, which then becomes something more reliable for your own personal scenario,both physically,and in your mind,too…cheers…

Wyatt E.

Johnathan Celso

Yeah… “not covering the ejection port” is silly. Slingshoting always takes the gun offline. Trailing thumbs is a no-no as well. It is always a “6 point purchase” – side of palm on top of the slide right before the ejection port, then pinky along the side of the slide, then ring, then middle, then index TIPS, then thumb directly mirroring pinky on the opposite side of the slide, with the hand arched over the ejection port. That way stovepipes can be swiped away easily as well as keeping the gun on target. But all that aside, it is good to see you reach out to the non-interested/discouraged shooter as well. For that good article!


Thanks Col Ben, Good read. Having a very experienced TI from USMC, then his career move to Blackwater (Xe), we often covered malfunctions that he and ‘others’ of his ‘trade’ have experienced while on station…. in Hot action (he carries the ‘holes’ to prove it). Stovepipes were set up, until we could snap them away rapidly. Double feeds and mis-feeds, due to sometimes faulty magazines not slammed fully into ‘lock’ position, also resulting in the dreaded mag ‘dropout’ during firefight stress. Some aftermarket magazines are prone to do this, especially when loaded to full capacity. As mentioned, there is definitely no ‘One size fits all’ in firearm mechanisms. ‘Different strokes for different Folks’, is one rule that seems universal. As you say, ‘Practice’. It’s the best medicine to cure what ails. :>)

Marry Root

upto I saw the check that said $7065, I didnt believe that…my… neighbour had been actualy bringing in money part time from their laptop.. there sisters roommate haz done this 4 less than 10 months and a short time ago paid for the dept on their place and bourt a great Jaguar E-type. go to, jump15.comCHECK IT OUT


Living in So. Fla., I seldom wear a coat to keep a revolver or any large pistol on my person concealed, so I decided to purchase a smaller weapon, a Beretta .25, and made myself a pocket holster for it. The Beretta is such a tiny gun that I cannot properly grasp the slide to rack it, so, instead, I keep a ninth bullet in the chamber and only have to cock it to fire if needed. I have no problem with racking the slide on larger guns, just the tiny ones.


I am having problems racking the slide on my new XDS! When I insert a mag and attempt to rack the slide and put a round in the chamber, the slide seems to stop short of the rear of the first round and jam. I have not had problems with any other semi auto pistols that I have or have shot. I am 64, a Vet and an avid shooter and collector. Any comments on this issue with the XDS?
The gun has gone back to Spfld. Armory and they say nothing is wrong. Also, when a mag is inserted and the slide released with the slide stop, the drop button is extremely hard to press.
I have a FL CC and planned to carry this gun but will NOT until it’s problems are corrected.


Bobo, I am retired law enforcement and former army ranger so please consider what I am about to say. When our body and brain are in the fight or flight condition the human body looses the aility to perform fine motors skills which dropping the slide release is a skill that will be very difficult to perform. You should never use the slide release lever to let the slide forward to load the handgun. You should always grip the slide overhand with 4 fingers on one side and the thumb on the other side. Do not grab the slide between the thumb and index finger (commonly referred to as sling shoting). The only time I ever use the slide release/lock is to clear a type 3 malfuntion or also kown as a double feed. You will always perform much better tacticlly by using this method and most importantly possibly save your life. I highly recommend you read the defensive handgun training manual written by US Navy Seal (Don Mann). The books name is ” The modern day gunslinger”. You can get them on Amazon.Com for as little as $8. Hope this helps.


I’m left handed with nerve damage in right thumb & index finger, hand three surgeries hoping to correct the numbness. I found attaching small pieces of ‘male’ velcro to the slide of my LCP I can grip the small slide much easier.


Nope. Not buying it. I have been shooting a 1911 for over 30 years and racking the slide is always the problem. Claiming to hold the slide then push the receiver is the same as holding the receiver and racking the slide. Only a psychological difference, not a mechanical difference.
Now that I am 65, racking a pistol has become a real pain thanks to arthritis and thumb joint deterioration.
I still have several regular slide type pistols, but have gone to DA only pistols for CCW. Just makes things so much better.

Leslie Hoerwinkle

I’ll take a revolver every time. Primarily use them for home defense and not competitive shooting.