Why We Shouldn’t Worry About Polymer Handguns

Why We Shouldn't Worry About Polymer Handguns

Why We Shouldn't Worry About Polymer Handguns

Glock and Steyr-Mannlicher were two of the most widely distributed pistol manufacturers in the early 80s that featured a polymer lower receiver. The core components that fire a gun need to always be made of metal because of the ballistic configuration of a modern pistol round. However, almost all of the support components can be made of polymer.

Polymer isn’t just “plastic”. There’s many different varieties and each is chemically unique and has properties great for stability. In almost all cases, using polymer in the gun makes that gun far lighter than using metal.

The main complaints about polymer handguns:

  • Cheap looking
  • Feels flimsier than steel or aluminum
  • Worried about cracking it if it gets dropped
  • Brake cleaning fluid may dissolve or weaken polymer

Okay, if we were going to honestly evaluate these, we’d need some test footage to keep our reading audience entertained. Here’s a video of a man throwing his Glock through a crazy number of torture tests including drops, drags, and everything.

Not to give a spoiler alert but — the gun works just fine.

Modern firearms are made with a startling amount of high precision engineering. They’re made to take a lot of abuse and continue working. There are pistols that are made of steel and aluminum and still have a poor record of performance (Jimenez and Hi-Point).

However, the most valid complaint is that some polymers can become brittle in extreme cold. We’re talking extended below freezing exposure. In any video you find on YouTube featuring a frozen Glock, the action will freeze. One FPSRussia video featured a Glock frozen in a cube of ice that he shot free with his 1911. He then threw it in the furnace and then blew it up with explosives.

Surprise, surprise, the lower receiver is the point of failure in these extreme circumstances.

If you operate as a lone wolf in the Arctic, perhaps a polymer lower receiver is not for you.

If you regularly bathe in brake fluid, a polymer lower receiver is not for you.

Outside of those two extreme situations, everyone else should be perfectly fine.

And while Conan the Barbarian did admire the virtue of steel, he also had to fight off a dude that transformed into a giant snake. So, let’s withhold judgement and pay a little respect to modern chemistry.

In conclusion, there’s no good argument for why you shouldn’t use a handgun that uses polymer. There shouldn’t be a value judgement on whether or not a handgun is made purely out of metal alloys or a mixture of alloys and polymer. The gun’s true test is the range and in real life. If it ever fails at the range, it’s probably not the handgun for everyday concealed carry. Polymer is the least of all things factoring into that equation.

No Code Needed
S&W M&P Shield M2.0 EDC Kit

S&W M&P Shield M2.0 EDC Kit

This is a neat kit where you get a S&W M&P9 Shield M2.0 along with an M&P Oasis knife and a Delta Force CS-10 Flashlight. Also, S&W is currently having a $50 rebate which brings the price down to $299.99. Not a bad deal.

1 15 16 17
Previous articleWhatever Happened to Red Ryder? A Look at the Olympic Class Air Guns
Next articleCan Carrying Concealed Everyday Be Better For Your Health?
Luke McCoy is the founder of USA Carry. In 2007, he launched USA Carry to provide concealed carry information and a community for those with concealed carry permits and firearm enthusiasts.
0 0 votes
Article Rating
Notify of
Newest Most Voted
Inline Feedbacks
View all comments
james lagnese

I liked the experiment where a polymer gun was put in a microwave. Loaded. Didn’t fare well loaded or not. Polymer has advantages for weight, but I read about a steel/aluminum alloy developed by the Koreans that is as strong as titanium. If used with firearms, it would offer lighter weight without losing strength or durability.


I currently make around 6-8 thousand dollars /month online. If you are willing to complete simple freelance jobs for 2h-5h each day from your house and get decent paycheck for doing it… Then this opportunity is for you… UR1.CA/pm79v



Polymer is a cheap interim to using strong alloys. The interaction between polymer and skin may have future unwanted reaction. The Recoil caused by a lighter lower receiver is enough to make one drop polymer guns. It’s not about aesthetics, but the discipline of steel dictates that a weapon needs to be more durable than that & perform more flawlessly.


With that said, any way to replace a Glock lower with aluminum components ???

james lagnese

Someone would have to forge it or investment cast it. I guess it could be done. Problem is that the frame is where the serial number is.


Pffft, we have a Federal Terrorist Union government gone traitors, mass murderers and Chaotic. That is the least of my worries.


Previous experience with different kinds of plastic getting brittle and crumbling when old still leaves me a bit skeptical on the long term durability of polymer. Steel and wood guns have lasted for hundreds of years. Polymer who knows? We will know more sometime around 2090 when the Glocks from the 1980s and 1990s are around 100 years old. For the time being if you are buying a heirloom piece I would stick with wood and metal. For every day knock around use polymer has shown its fine.